Hardware Secrets
Home | Camera | Case | CE | Cooling | CPU | Input | Memory | Mobile | Motherboard | Networking | Power | Storage | Video | Other
Content
Articles
Editorial
First Look
Gabriel’s Blog
News
Reviews
Tutorials
Main Menu
About Us
Awarded Products
Datasheets
Dictionary
Download
Drivers
Facebook
Links
Manufacturer Finder
Newsletter
RSS Feed
Test Your Skills
Twitter
Newsletter
Subscribe today!
Recommended
Build Your Own PC Do-It-Yourself For Dummies
Build Your Own PC Do-It-Yourself For Dummies, by Mark L. Chambers (For Dummies), starting at $7.96
Home » Case
Rosewill Wind Ryder RZLS142-AP Case Review
Author: Gabriel Torres 31,137 views
Type: Reviews Last Updated: September 23, 2008
Page: 2 of 5
Inside Wind Ryder

The side panels are fastened to the chassis using thumbscrews, which is great. Even though you can remove the right panel, the motherboard tray is permanently attached to the chassis. In Figure 6, you can see the left panel remove from the case. As you can see it has a duct and a small mesh to make the case compatible with Intel’s Chassis Air Guide Design 1.1. This design, however, is targeted to Pentium 4 CPUs based on the “Prescott” core, so it looks like we are talking about a case with a dated design.

Rosewill RZLS142-AP
click to enlarge
Figure 6: Side panel.

In Figure 7 you have an overall look from the interior of this case.

Rosewill RZLS142-AP
click to enlarge
Figure 7: Inside RZLS142-AP.

In Figure 8, you can see the rear panel viewed from inside, where you can see the rear 120 mm fan and the screwless mechanism for installing daughterboards.

Rosewill RZLS142-AP
click to enlarge
Figure 8: Rear panel.

As mentioned, the rear 120 mm fan uses a three-pin connector for motherboards. It is black and does not glow when the PC is turned on.

The mechanism for fastening daughterboards looks cheap. It is made with just one long plastic piece instead of using individual mechanisms. Also, the tip of the mechanism – which holds the mechanism to the bottom part of the case – is very thin and it is just a matter of time until you break it.

Print Version | Send to Friend | Bookmark Article « Previous |  Page 2 of 5  | Next »

Related Content
  • Rosewill Conqueror Case Review
  • Thermaltake Element T Case Review
  • Enermax Staray Case Review
  • NZXT M59 Case Review
  • Cooler Master Gladiator 600 Case Review

  • RSSLatest Content
    ASRock FM2A88X-ITX+ Motherboard
    April 27, 2015 - 2:40 AM
    GeForce GTX TITAN X Video Card Review
    April 22, 2015 - 4:00 AM
    A10-7800 CPU Review
    April 6, 2015 - 2:50 AM
    Samsung Galaxy A5 Smartphone Review
    March 31, 2015 - 2:47 AM
    A10-6800K vs. Core i3-4150 CPU Review
    March 25, 2015 - 3:15 AM
    Core i7-5960X CPU Review
    February 24, 2015 - 3:00 AM









    2004-15 Clube do Hardware, all rights reserved.
    Advertising | Legal Information | Privacy Policy
    All times are Pacific Standard Time (PST, GMT -08:00)