Hardware Secrets
Home | Camera | Case | CE | Cooling | CPU | Input | Memory | Mobile | Motherboard | Networking | Power | Storage | Video | Other
First Look
Gabriel’s Blog
Main Menu
About Us
Awarded Products
Manufacturer Finder
RSS Feed
Test Your Skills
Subscribe today!
Build Your Own PC Do-It-Yourself For Dummies
Build Your Own PC Do-It-Yourself For Dummies, by Mark L. Chambers (For Dummies), starting at $7.96
Home » Case
Rosewill Conqueror Case Review
Author: Gabriel Torres 34,825 views
Type: Reviews Last Updated: January 20, 2009
Page: 2 of 6
Introduction (Cont’d )
Hardware Secrets Golden Award

We removed all covers to see what is behind them, see Figure 5. By default this case comes with its two hard drive cages installed on the lower bays, but you can move them around. Conqueror has two 120 mm frontal fans, which are attached to the hard disk drive cages. Even though this case does not feature a speed controller for its fans, all fans use a three-pin connector, allowing you to install them on the motherboard and thus monitor their speed. These fans glow blue when turned on. We were surprised to see that the fans used are from SilverStone (FN-121BL).

Rosewill Conqueror Case
click to enlarge
Figure 5: Front panel.

In Figure 6, you can see some of the bay covers, notice the dust filters.

Rosewill Conqueror Case
click to enlarge
Figure 6: Bay covers.

The small panel containing the audio and USB connectors is located on the top of the case. This case comes with one FireWire port and two USB ports. The two USB ports are very far away from each other, allowing you to install two “fat” USB devices at the same time.

Rosewill Conqueror Case
click to enlarge
Figure 7: Available connectors.

The rear panel from Conqueror can be seen in Figure 8. This case uses meshed slot covers, which is great to improve the ventilation inside the case. It also comes with a rear 120 mm fan and what is really interesting about this case is that it has a big open hole in front of the rear fan. Several cases found on the market have several small holes in front of the fan instead of having one big hole, what blocks part of the airflow produced by the fan. The left side panel is attached to the case using thumbscrews, but the right side panel uses regular screws. Conqueror uses the standard ATX layout, with the power supply going on the top of the case and seven expansion slots.

Rosewill Conqueror Case
click to enlarge
Figure 8: Rear panel.

Now let’s take a look inside Conqueror.

Print Version | Send to Friend | Bookmark Article « Previous |  Page 2 of 6  | Next »

Related Content
  • Sigma Unicorn Case Review
  • Raidmax Aura Case Review
  • Tagan A+ Curbic Case Review
  • Rosewill Wind Ryder RZLS142-AP Case Review
  • NZXT Panzerbox Case Review

  • RSSLatest Content
    ASRock FM2A88X-ITX+ Motherboard
    April 27, 2015 - 2:40 AM
    GeForce GTX TITAN X Video Card Review
    April 22, 2015 - 4:00 AM
    A10-7800 CPU Review
    April 6, 2015 - 2:50 AM
    Samsung Galaxy A5 Smartphone Review
    March 31, 2015 - 2:47 AM
    A10-6800K vs. Core i3-4150 CPU Review
    March 25, 2015 - 3:15 AM
    Core i7-5960X CPU Review
    February 24, 2015 - 3:00 AM

    © 2004-15 Clube do Hardware, all rights reserved.
    Advertising | Legal Information | Privacy Policy
    All times are Pacific Standard Time (PST, GMT -08:00)