Hardware Secrets
Home | Camera | Case | CE | Cooling | CPU | Input | Memory | Mobile | Motherboard | Networking | Power | Storage | Video | Other
Content
Articles
Editorial
First Look
Gabriel’s Blog
News
Reviews
Tutorials
Main Menu
About Us
Awarded Products
Datasheets
Dictionary
Download
Drivers
Facebook
Links
Manufacturer Finder
Newsletter
RSS Feed
Test Your Skills
Twitter
Newsletter
Subscribe today!
Search
Recommended
Build Your Own PC Do-It-Yourself For Dummies
Build Your Own PC Do-It-Yourself For Dummies, by Mark L. Chambers (For Dummies), starting at $6.23


Home » Case
NZXT Vulcan Case Review
Author: Gabriel Torres 48,797 views
Type: Reviews Last Updated: May 12, 2010
Page: 1 of 6
Introduction
Hardware Secrets Golden Award

Mini-tower cases are usually associated with low-end computers, but some manufacturers like In Win and NZXT are releasing products full of nice features for gamers that want to build a small yet powerful gaming machine. Let’s take an in-depth look at NZXT Vulcan, which follows this concept.

Being a mini-tower product, Vulcan only accepts microATX motherboards for the convenience of having a small computer. Ventilation was the main focus when the manufacturer designed this small case, as you can easily see by the presence of so many ventilation meshes, see on Figures 1 and 2.

NZXT Vulcan case
click to enlarge
Figure 1: NZXT Vulcan case.

NZXT Vulcan case
click to enlarge
Figure 2: NZXT Vulcan case.

As you can see in Figure 2, most of Vulcan’s left panel is used by a huge mesh, which has a place for you to install an optional 200-mm fan, with the panel using rubber rings for holding the fan and thus help to reduce noise. This panel doesn’t feature an air filter (it should).

The front of the case can be seen in Figure 3. No door is present and the case has two external 5.25” bays and two external 3.5” bays. As you can see, all parts on the front panel are meshed, featuring air filters behind them. A 120 mm fan is present on the lower section of the front panel, using a three-pin fan connector (no technical information about this fan was provided).

NZXT Vulcan case
click to enlarge
Figure 3: Front panel.

Vulcan has two analog fan speed controllers – see the two knobs labeled “II” and “I” on the top part of the front panel. The two fans from the case don’t come installed to these controllers: you are the one that should perform this installation, which is ridiculously easy. Each controller has two three-pin connectors, so each one can control up to two fans. The connectors are labeled “1” and “2,” so it is quite easy to recognize them. Since this case allows you to install a total of five fans, one of them can’t use the fan controllers, if you decide to install them all.

The case has a 7” (180 mm) line on the right side of the front panel that glows orange if you connect it to the power supply. This light comes with an on/off switch on the rear of the case. This light needs some work, though. On a bright room it could barely be seen.
Print Version | Send to Friend | Bookmark Article Page 1 of 6  | Next »

Related Content
  • In Win Dragon Slayer Case Review
  • Cooler Master Elite 100 Case Review
  • Moneual MonCaso Sonamu G100 Case Review
  • SilverStone Temjin TJ08-E Case Review
  • SilverStone Precision PS07 Case Review

  • RSSLatest Content
    ASUS ZenFone 5 Smartphone Review
    October 15, 2014 - 7:00 PM
    ASUS AM1M-A Motherboard
    October 15, 2014 - 4:30 AM
    ASRock X99 Extreme4 Motherboard
    October 14, 2014 - 4:10 AM
    Cooler Master Elite 130 Case Review
    October 9, 2014 - 2:46 AM
    ASUS RAMPAGE V EXTREME Motherboard
    October 7, 2014 - 2:50 AM
    ASRock Fatal1ty X99M Killer Motherboard
    October 6, 2014 - 5:40 AM
    ASUS X99-DELUXE Motherboard
    September 30, 2014 - 1:07 AM
    MSI GT70 2PE Dominator Pro Laptop Review
    September 25, 2014 - 1:15 AM







    © 2004-14, Hardware Secrets, LLC. All rights reserved.
    Advertising | Legal Information | Privacy Policy
    All times are Pacific Standard Time (PST, GMT -08:00)