The fan controller uses only one 5.25” bay. It is merely a fan controller, with neither thermometers nor USB ports. Each channel has a simple sliding potentiometer and an LED-illuminated number below it. There is a small button on the left of the front panel, which will be discussed later. The front panel is rubber-coated for a nice soft texture.

click to enlarge
Figure 3: Front panel

Figure 4 exhibits the side of the controller, where you see the holes for the screws.

click to enlarge
Figure 4: Side view

Figure 5 presents the rear side of the controller. The cables come connected to the circuit board, but you can remove the ones you will not use.

click to enlarge
Figure 5: Rear side