Figure 4 illustrates the front of the Respire T20, where the 120 mm fan goes.

click to enlarge
Figure 4: Front view

Figure 5 reveals the side of the cooler. Notice that the center heatpipe, which is 8 mm in diameter, is larger than the side ones, which are 6 mm in diameter.

click to enlarge
Figure 5: Side view

Figure 6 unveils the rear side of the cooler. You can see the “step” between the sides of the fins.

click to enlarge
Figure 6: Rear view

In Figure 7, you can see the top of the cooler, where the tips of the heatpipes are visible.

click to enlarge
Figure 7: Top view