Hardware Secrets
Home | Camera | Case | CE | Cooling | CPU | Input | Memory | Mobile | Motherboard | Networking | Power | Storage | Video | Other
First Look
Gabriel’s Blog
Main Menu
About Us
Awarded Products
Manufacturer Finder
RSS Feed
Test Your Skills
Subscribe today!
Upgrading and Repairing PCs (21st Edition)
Upgrading and Repairing PCs (21st Edition), by Scott Mueller (Que Publishing), starting at $27.65
Home » CPU
Inside AMD K10 Architecture
Author: Gabriel Torres 86,838 views
Type: Tutorials Last Updated: September 3, 2007
Page: 2 of 6
L3 Memory Cache

Just to remember, memory cache is a high-speed memory (static RAM or SRAM) embedded inside the CPU used to store data that the CPU may need. If the data required by the CPU isn’t located in the cache, it must go all the way to the main RAM memory, which reduces its speed, as the RAM memory is accessed using the CPU external clock rate. For example, on an AMD 3 GHz CPU, the memory cache is accessed at 3 GHz but the RAM memory is accessed at 800 MHz (if you are using DDR2-800 memories) or less.

On Pentium D and AMD dual-core CPUs based on K8 architecture each CPU core has its own L2 memory cache. On Intel dual-core CPUs based on Core and Pentium M microarchitectures, there is only L2 memory cache, which is shared between the two cores.

Intel says that this shared architecture is better, because on the separated cache approach at some moment one core may run out of cache while the other may have unused parts on its own L2 memory cache. When this happens, the first core must grab data from the main RAM memory, even though there was empty space on the L2 memory cache of the second core that could be used to store data and prevent that core from accessing the main RAM memory. So on a Core 2 Duo processor with 4 MB L2 memory cache, one core may be using 3.5 MB while the other 512 KB (0.5 MB), contrasted to the fixed 50%-50% division used on other dual-core CPUs.

On the other hand, current quad-core Intel CPUs like Core 2 Extreme QX and Core 2 Quad use two dual-core chips, meaning that this sharing only occurs between cores 1 & 2 and 3 & 4. In the future Intel plans to launch quad-core CPUs using a single chip. When this happens the L2 cache will be shared between the four cores.

In Figure 3, you can see a comparison between these three L2 memory cache solutions.

Dual-Core and Quad-Core L2 Memory Cache Architectures
click to enlarge
Figure 3: Comparison between current L2 memory cache solutions on current multi-core CPUs.

K10 architecture adds a shared L3 memory cache inside the CPU. This is shown in Figure 4. The size of this cache will depend on the CPU model, just like what happens with the size of L2 cache.

K10 Barcelona Memory Cache Architecture
click to enlarge
Figure 4: K10 cache architecture.

AMD calls this approach as “Balanced Smart Cache.”

By the way, L1 memory cache continues unaltered: 64 KB for instructions and 64 KB for data per core (on Figure 1 AMD shows “512 KB,” but this is the total figure for a quad-core CPU).

Print Version | Send to Friend | Bookmark Article « Previous |  Page 2 of 6  | Next »

Related Content
  • Dual Core AMD Processors
  • All Athlon 64 Models
  • All Opteron Models
  • AMD Quad FX Platform
  • All Phenom Models

  • RSSLatest Content
    ASRock FM2A88X-ITX+ Motherboard
    April 27, 2015 - 2:40 AM
    GeForce GTX TITAN X Video Card Review
    April 22, 2015 - 4:00 AM
    A10-7800 CPU Review
    April 6, 2015 - 2:50 AM
    Samsung Galaxy A5 Smartphone Review
    March 31, 2015 - 2:47 AM
    A10-6800K vs. Core i3-4150 CPU Review
    March 25, 2015 - 3:15 AM
    Core i7-5960X CPU Review
    February 24, 2015 - 3:00 AM

    2004-15 Clube do Hardware, all rights reserved.
    Advertising | Legal Information | Privacy Policy
    All times are Pacific Standard Time (PST, GMT -08:00)