Hardware Secrets
Home | Camera | Case | CE | Cooling | CPU | Input | Memory | Mobile | Motherboard | Networking | Power | Storage | Video | Other
Content
Articles
Editorial
First Look
Gabriel’s Blog
News
Reviews
Tutorials
Main Menu
About Us
Awarded Products
Datasheets
Dictionary
Download
Drivers
Facebook
Links
Manufacturer Finder
Newsletter
RSS Feed
Test Your Skills
Twitter
Newsletter
Subscribe today!
Search
Recommended
Build Your Own PC Do-It-Yourself For Dummies
Build Your Own PC Do-It-Yourself For Dummies, by Mark L. Chambers (For Dummies), starting at $6.21


Home » Case
In Win Diva Case Review
Author: Gabriel Torres 44,551 views
Type: Reviews Last Updated: February 22, 2010
Page: 3 of 8
Inside In Win Diva
Hardware Secrets Golden Award

The left panel is fastened to the case using two big black thumbscrews, but the right panel is fastened using regular screws. The right panel is entirely made of plastic, while the left panel is made of steel with a plastic cap applied to it. This was done to acoustically insulate the computer – the right panel doesn’t need this steel sheet because on this side of the case we have the motherboard tray, which already provides this insulation.

In Figure 9, you can see the interior of the case right after we remove the left panel. As you can see, even though the rear panel is painted black, the interior isn’t. The big steel plate that you see “closing” the case is the optical drive bay. This plate is attached to the case using two silver thumbscrews located on the rear panel from the case.

In Win Diva Case
click to enlarge
Figure 9: Overall look.

In Figure 10 you can have a better look from inside Diva with the optical drive bay removed.

In Win Diva Case
click to enlarge
Figure 10: Overall look.

In Figure 11 we have another overall look, where you can see the top 80 mm fan. This fan uses a three-pin connector, so you need to install it on your motherboard, installation that allows you to monitor the speed from the fan. No technical specification about this fan is given.

In Win Diva Case
click to enlarge
Figure 11: Overall look.

Space inside this case is scarce. You can install a slim video card up to 6 19/64” (160 mm) long, but this case is definitely targeted to motherboards with on-board video.

Print Version | Send to Friend | Bookmark Article « Previous |  Page 3 of 8  | Next »

Related Content
  • Antec ISK300-150 Case Review
  • SilverStone Sugo SG07 Case Review
  • Cooler Master Elite 100 Case Review
  • SilverStone Fortress FT03-MINI Case Review
  • Bitfenix Prodigy Case Review

  • RSSLatest Content
    ASUS ZenFone 5 Smartphone Review
    October 15, 2014 - 7:00 PM
    ASUS AM1M-A Motherboard
    October 15, 2014 - 4:30 AM
    ASRock X99 Extreme4 Motherboard
    October 14, 2014 - 4:10 AM
    Cooler Master Elite 130 Case Review
    October 9, 2014 - 2:46 AM
    ASUS RAMPAGE V EXTREME Motherboard
    October 7, 2014 - 2:50 AM
    ASRock Fatal1ty X99M Killer Motherboard
    October 6, 2014 - 5:40 AM
    ASUS X99-DELUXE Motherboard
    September 30, 2014 - 1:07 AM
    MSI GT70 2PE Dominator Pro Laptop Review
    September 25, 2014 - 1:15 AM







    © 2004-14, Hardware Secrets, LLC. All rights reserved.
    Advertising | Legal Information | Privacy Policy
    All times are Pacific Standard Time (PST, GMT -08:00)