Notice: Undefined index: article1496 in /www/hardwaresecrets/article.php on line 5 Huntkey Jumper 600B Power Supply Review | Hardware Secrets
Hardware Secrets
Home | Camera | Case | CE | Cooling | CPU | Input | Memory | Mobile | Motherboard | Networking | Power | Storage | Video | Other
Content
Articles
Editorial
First Look
Gabriel’s Blog
News
Reviews
Tutorials
Main Menu
About Us
Awarded Products
Datasheets
Dictionary
Download
Drivers
Facebook
Links
Manufacturer Finder
Newsletter
RSS Feed
Test Your Skills
Twitter
Newsletter
Subscribe today!


Home » Power
Huntkey Jumper 600B Power Supply Review
Author: Gabriel Torres 23,138 views
Type: Reviews Last Updated: February 23, 2012
Page: 1 of 11
Introduction
Hardware Secrets Silver Award

Two years ago, we reviewed the Huntkey Jumper 550, which exceeded our expectations. Now it is time to review the Jumper 600B, which comes with the 80 Plus Bronze certification. (Hence the letter “B” after the product wattage; it is important to understand that the 500 W and 550 W models from this family have the standard 80 Plus certification.) Let’s see how the Jumper 600B fared on our tests.

Huntkey Jumper 600B
click to enlarge
Figure 1: Huntkey Jumper 600B power supply

Huntkey Jumper 600B
click to enlarge
Figure 2: Huntkey Jumper 600B power supply

The Huntkey Jumper 600B is 6.3” (160 mm) deep, using a 140 mm sleeve bearing fan on its bottom (Yate Loon D14SH-12).

Different from the 550 W model, the 600B version doesn’t have a modular cabling system. All cables are protected with nylon sleeves, but the sleeves don’t come from inside the unit. This power supply comes with the following cables:

  • Main motherboard cable with a 20/24-pin connector, 17.7” (45 cm) long
  • One cable with two ATX12V connectors that together form an EPS12V connector, 17.7” (45 cm) long
  • Two cables, each with one six/eight-pin connector and one six-pin connector for video cards, 17.7” (45 cm) to the first connector, 5.9” (15 cm) between connectors
  • Two cables, each with three SATA power connectors, 17.7” (45 cm) to the first connector, 5.9” (15 cm) between connectors
  • One cable with four standard peripheral power connectors, 17.7” (45 cm) to the first connector, 5.9” (15 cm) between connectors
  • One cable with three standard peripheral power connectors and one floppy disk drive power connector, 17.7” (45 cm) to the first connector, 5.9” (15 cm) between connectors

All wires are 18 AWG, which is the minimum recommended gauge, except for the wires on the main motherboard cable, which are thicker (16 AWG).

The cable configuration is excellent for a 600 W power supply, allowing you to install two high-end video cards without the need of adapters. On the other hand, some users may find the cables too short.

Huntkey Jumper 600B
click to enlarge
Figure 3: Cables

Let’s now take an in-depth look inside this power supply.

Print Version | Send to Friend | Bookmark Article Page 1 of 11  | Next »

Related Content
  • Rosewill HIVE 650 W Power Supply Review
  • Antec High Current Gamer M 620 W Power Supply Review
  • 3R System AK6-600M Power Supply Review
  • LEPA B650 Power Supply Review
  • FSP Raider 650 W Power Supply Review

  • RSSLatest Content
    ASRock Z97 Anniversary Motherboard
    December 16, 2014 - 4:27 AM
    Gigabyte H81M-S2PH Motherboard
    December 12, 2014 - 3:05 AM
    Aerocool Dead Silence Case Review
    December 2, 2014 - 3:00 AM
    NZXT S340 Case Review
    November 27, 2014 - 3:45 AM
    AMD A4-5000 CPU Review
    November 26, 2014 - 3:10 AM
    Samsung Galaxy Note Pro 12.2 Tablet Review
    November 25, 2014 - 3:00 AM
    ASUS X99-PRO Motherboard
    November 5, 2014 - 3:00 AM
    ASRock QC5000-ITX Motherboard
    November 4, 2014 - 3:00 AM
    Gigabyte X99-UD3 Motherboard
    October 30, 2014 - 8:30 AM







    © 2004-14, Hardware Secrets, LLC. All rights reserved.
    Advertising | Legal Information | Privacy Policy
    All times are Pacific Standard Time (PST, GMT -08:00)