| How to Unclog Epson Print Heads |
|
|
|
| Disassembling The Printer |
Disassemble the printer. Almost all of them are similar to disassemble. First you have to remove the printer housing, by opening its cover, moving the paper type adjustment lever (a.k.a. PG, Platen Gap) towards (+) side, than removing the two or four screws available on the printer top.
click to enlarge
Figure 3: Removing the printer housing.
After removing the cover, you have to remove two bushings, one at each side of the carriage guide shaft. TAKE NOTES OF THE POSITION OF THE BUSHINGS BEFORE YOU REMOVE THEM. Those bushings regulate the distance between the print head and the paper (”parallelism“). If you put them back wrong, your printer will print wrong.
click to enlarge
Figure 4: How to remove the printer carriage assembly.
|
| « Previous | Page 2 of 4 | Next » |
| Print Version | Send to Friend |
Bookmark Article
| Comments (2)
|
|
|
|
|
 Latest News
May 23, 2013 - 9:26 AM PST
May 22, 2013 - 9:39 AM PST
May 22, 2013 - 9:24 AM PST
May 22, 2013 - 9:23 AM PST
May 22, 2013 - 9:22 AM PST
May 21, 2013 - 10:11 AM PST
May 20, 2013 - 7:42 AM PST
May 20, 2013 - 7:40 AM PST
May 17, 2013 - 9:10 AM PST
May 16, 2013 - 9:58 AM PST
Latest Content
Our Most Popular Articles
1,879,689 views
1,813,046 views
1,437,541 views
1,408,225 views
1,295,669 views
1,149,814 views
1,092,275 views
805,301 views
742,892 views
730,260 views
Latest Threads in Our Forums
by usernamesecrets
by c.hegge
by Hardware Secrets Team
by Gabriel Torres
by Hardware Secrets Team
by Hardware Secrets Team
by Hardware Secrets Team
by Hardware Secrets Team
by Gabriel Torres
by keith.aranjuez
|
