Hardware Secrets
Home | Camera | Case | CE | Cooling | CPU | Input | Memory | Mobile | Motherboard | Networking | Power | Storage | Video | Other
First Look
Gabriel’s Blog
Main Menu
About Us
Awarded Products
Manufacturer Finder
RSS Feed
Test Your Skills
Subscribe today!
Solders and Soldering
Solders and Soldering, by Howard H. Manko (McGraw-Hill Professional), starting at $598.99

Home » Motherboard
How To Desolder Components
Author: Gabriel Torres 381,012 views
Type: Tutorials Last Updated: July 8, 2005
Page: 1 of 8

Sometimes PC technicians need to replace electronic components, such as electrolytic capacitors and connectors. The most common case is when you have a motherboard were the electrolytic capacitors leaked.

Desoldering and replacing components is not as easy as soldering them. The main problem is that printed circuit boards, especially motherboards, have several layers. You see only two layers (called ”solder layer“ and ”component layer“), but there are other layers inside the printed circuit board, like a sandwich. The holes where the components are soldered to are metalized and serve not only to hold the component, but also to make the electrical connection between the two visible PCB layers and the internal PCB layers, which are not visible. If you make a wrong move while trying to remove a component, you may break the connection between the hole and the internal board layers, destroying your board.

In this tutorial we will explain you how to correctly desolder components, with several practical tips on how to get the best result.

Needed Tools

To desolder components you will need the following tools:

  • Soldering iron (25 W or 30 W, don’t use one above this power spec)
  • Solder
  • Desolder pump (a.k.a. solder sucker)
  • Cleaning cloth
  • Cleaning sponge
  • Small flat-tip screwdriver
  • Isopropilic Alcohol (Isopropanol), do not use regular alcohol
  • Toothbrush

How To Desolder Components
click to enlarge
Figure 1: Needed tools.


Turn your soldering iron on and wait for it to get hot (three minutes, more or less). Wet the cleaning sponge and clean the soldering iron tip, making the movement shown in Figure 2. Make sure you repeat the movement until you have covered the entire tip. Some smoke will appear, don’t worry, that’s normal since the sponge is wet.

How To Dessolder Components
click to enlarge
Figure 2: Cleaning the soldering iron.

During the desoldering process you may need to clean the soldering iron tip again. Every time you see the soldering iron tip with black parts it is time to clean it again.

Print Version | Send to Friend | Bookmark Article Page 1 of 8  | Next »

Related Content
  • ECS Factory Tour in ShenZhen, China
  • RoHS Explained
  • Introduction to Logic Gates
  • How To Replace Your Power Supply
  • How to Identify Japanese Electrolytic Capacitors

  • RSSLatest Content
    ASRock Z97 Anniversary Motherboard
    December 16, 2014 - 4:27 AM
    Gigabyte H81M-S2PH Motherboard
    December 12, 2014 - 3:05 AM
    Aerocool Dead Silence Case Review
    December 2, 2014 - 3:00 AM
    NZXT S340 Case Review
    November 27, 2014 - 3:45 AM
    AMD A4-5000 CPU Review
    November 26, 2014 - 3:10 AM
    Samsung Galaxy Note Pro 12.2 Tablet Review
    November 25, 2014 - 3:00 AM
    ASUS X99-PRO Motherboard
    November 5, 2014 - 3:00 AM
    ASRock QC5000-ITX Motherboard
    November 4, 2014 - 3:00 AM
    Gigabyte X99-UD3 Motherboard
    October 30, 2014 - 8:30 AM

    © 2004-14, Hardware Secrets, LLC. All rights reserved.
    Advertising | Legal Information | Privacy Policy
    All times are Pacific Standard Time (PST, GMT -08:00)