Hardware Secrets
Home | Camera | Case | CE | Cooling | CPU | Input | Memory | Mobile | Motherboard | Networking | Power | Storage | Video | Other
First Look
Gabriel’s Blog
Main Menu
About Us
Awarded Products
Manufacturer Finder
RSS Feed
Test Your Skills
Subscribe today!
Upgrading and Repairing PCs (21st Edition)
Upgrading and Repairing PCs (21st Edition), by Scott Mueller (Que Publishing), starting at $29.99

Home » Storage
HighPoint RocketRAID 2302 RAID Controller Review
Author: Gabriel Torres 53,933 views
Type: Reviews Last Updated: June 2, 2008
Page: 2 of 6

Installation of RocketRAID 2302 is very easy. Simply install it on any available PCI Express slot from your motherboard, install the hard disk drives and turn on your PC to setup your RAID array. As mentioned, even though it is a PCI Express x1 card you can install RocketRAID 2302 on any PCI Express slot, including x4, x8 and x16.

After turning on your PC, you will need to press Control H to enter the card’s control panel. However, we highly recommend you to first upgrade the card’s BIOS. This is done by downloading the latest BIOS from the manufacturer’s website (the file contains both the BIOS file and the programming software) and running the program, unzipping the file first, of course. You will have to do this procedure by installing the card on any computer with Windows, and you will need to do that on another computer if you are building a new system.

The procedure is similar from what is described on our How to Setup a RAID System tutorial. The only difference is that before doing anything you need “Initialize” each drive. If you don’t do this the control panel will complain that there are no RAID-compatible drives on the system.

One thing we noticed is that RocketRAID 2302 doesn’t allow us to select the strip size that will be used.

HighPoint RocketRAID 2302 RAID controller
click to enlarge
Figure 4: RocketRAID 2302 control panel.

Next you will need to install the operating system. Don’t forget to create the necessary floppy disk (read the above mentioned tutorial for more details), by running the CD-ROM that comes with the product on any computer and selecting the appropriate option.

After installing the operating system you should install the control panel for the RAID card. Thru this control panel you can check the status of the array, change the array level, turn any of the disks off so it can be removed with the computer turned on (hot swap), access the control panel remotely through a web-based interface and even get e-mail notifications if something goes wrong with your array.

Print Version | Send to Friend | Bookmark Article « Previous |  Page 2 of 6  | Next »

Related Content
  • How to Setup a RAID System
  • Does RAID0 Really Increase Disk Performance?
  • Western Digital VelociRaptor WD3000GLFS Hard Disk Drive Review
  • Thecus N5200 NAS Review
  • Some thoughts on the performance of SSD RAID 0 arrays

  • RSSLatest Content
    ASUS ZenFone 5 Smartphone Review
    October 15, 2014 - 7:00 PM
    ASUS AM1M-A Motherboard
    October 15, 2014 - 4:30 AM
    ASRock X99 Extreme4 Motherboard
    October 14, 2014 - 4:10 AM
    Cooler Master Elite 130 Case Review
    October 9, 2014 - 2:46 AM
    October 7, 2014 - 2:50 AM
    ASRock Fatal1ty X99M Killer Motherboard
    October 6, 2014 - 5:40 AM
    ASUS X99-DELUXE Motherboard
    September 30, 2014 - 1:07 AM
    MSI GT70 2PE Dominator Pro Laptop Review
    September 25, 2014 - 1:15 AM
    Sony Xperia T3 Smartphone Review
    September 22, 2014 - 1:50 AM

    2004-14, Hardware Secrets, LLC. All rights reserved.
    Advertising | Legal Information | Privacy Policy
    All times are Pacific Standard Time (PST, GMT -08:00)