Hardware Secrets
Home | Camera | Case | CE | Cooling | CPU | Input | Memory | Mobile | Motherboard | Networking | Power | Storage | Video | Other
Content
Articles
Editorial
First Look
Gabriel’s Blog
News
Reviews
Tutorials
Main Menu
About Us
Awarded Products
Datasheets
Dictionary
Download
Drivers
Facebook
Links
Manufacturer Finder
Newsletter
RSS Feed
Test Your Skills
Twitter
Newsletter
Subscribe today!
Search
Recommended
Build Your Own PC Do-It-Yourself For Dummies
Build Your Own PC Do-It-Yourself For Dummies, by Mark L. Chambers (For Dummies), starting at $6.20


Home » Case
Fractal Design Node 304 Case Review
Author: Gabriel Torres 26,692 views
Type: Reviews Last Updated: November 19, 2012
Page: 3 of 6
Inside the Fractal Design Node 304
Hardware Secrets Golden Award

To open the Node 304, you must remove its top cover, which is attached to the chassis using four black thumbscrews. This case only supports Mini-ITX and Mini-DTX motherboards. There are several clips for fastening cables with cable ties on the bottom panel. The case comes with three hard drive “hangers” (the white parts in Figure 8). Expansion cards are fastened using regular screws.

Fractal Design Node 304
click to enlarge
Figure 8: Overall look

Fractal Design Node 304
click to enlarge
Figure 9: Overall look with the hard drive “hangers” removed

On its default configuration, the Fractal Design Node 304 supports video cards up to 6.3” (160 mm) long. For installing longer video cards, you need to remove the hard drive “hanger” that is in front of the expansion slots. If you install a power supply that is deeper than 6.3” (160 mm), you can only fit video cards up to 6.7” (170 mm) long. (You have to take into consideration the length of the power supply’s modular cabling system, if available.) With a power supply that is up to 6.3” (160 mm) deep, you can fit video cards up to 12.2” (310 mm) long.

The Fractal Design Node 304 supports CPU coolers up to 6.5” (165 mm) tall.

As explained before, one of the highlights of this case is the support for regular ATX power supplies. The power supply is installed sideways, at the front part of the case, with either its bottom fan facing inside the case or facing outside the case, so you can decide if you want the fan of your power supply pulling air from inside the case or from outside of it. As already shown, there is an air filter for the power supply fan.

If you don’t have a video card, you can install a power supply that is up to 7.1” (180 mm) deep. With a video card, you must follow the guidelines already explained above. Keep in mind that the 6.3” (160 mm) limit is for the total depth of the power supply, including its modular cabling system. Therefore, you can install a power supply without a modular cabling system up to 6.3” (160 mm) deep, but for power supplies with a modular cabling system, you should pick a unit with a nominal depth of 5.5” (140 mm).

Fractal Design Node 304
click to enlarge
Figure 10: Power supply compartment

Print Version | Send to Friend | Bookmark Article « Previous |  Page 3 of 6  | Next »

Related Content
  • Streacom FC5 EVO Case Review
  • Fractal Design Node 605 Case Review
  • Cooler Master HAF XB Case Review
  • SilverStone Sugo SG09 Case Review
  • SilverStone Precision PS08 Case Review

  • RSSLatest Content
    ASUS ZenFone 5 Smartphone Review
    October 15, 2014 - 7:00 PM
    ASUS AM1M-A Motherboard
    October 15, 2014 - 4:30 AM
    ASRock X99 Extreme4 Motherboard
    October 14, 2014 - 4:10 AM
    Cooler Master Elite 130 Case Review
    October 9, 2014 - 2:46 AM
    ASUS RAMPAGE V EXTREME Motherboard
    October 7, 2014 - 2:50 AM
    ASRock Fatal1ty X99M Killer Motherboard
    October 6, 2014 - 5:40 AM
    ASUS X99-DELUXE Motherboard
    September 30, 2014 - 1:07 AM
    MSI GT70 2PE Dominator Pro Laptop Review
    September 25, 2014 - 1:15 AM







    © 2004-14, Hardware Secrets, LLC. All rights reserved.
    Advertising | Legal Information | Privacy Policy
    All times are Pacific Standard Time (PST, GMT -08:00)