The front panel of the Fractal Design Arc Midi has a very sober look, with only two external 5.25” bays, which allowed more space for internal bays. The front panel looks like it is made of aluminum, but it is actually made of plastic. The external bays use solid covers, and the bottom one comes with an adapter for you to install an external 3.5” device.

click to enlarge
Figure 4: Front panel

Internally, the case has two hard drive cages, and it comes with a 140 mm fan on its front panel, cooling the top hard drive cage. You can install a second 140 mm fan to cool down the bottom cage, or you can move the fan to the bottom if you prefer to cool down the bottom cage instead of the top one. This fan spins at 1,000 rpm and comes with a three-pin connector, and it can be installed on the fan controller that comes with the product. There is an air filter for these two fans.

click to enlarge
Figure 5: Front panel

click to enlarge
Figure 6: Front fan