The bottom panel has an air filter for the power supply fan. The rear panel and the interior of the Enermax Hoplite ST case are painted with the same color as the exterior – white, in our case.

click to enlarge
Figure 8: Bottom panel

The case has seven expansion slots, using vented covers.

The rear panel comes with a 120 mm fan, which uses a standard three-pin fan power connector. No technical specifications for this fan are provided.

On the Enermax Hoplite ST case, the power supply goes on the bottom part of the case.

There are four holes, protected with rubber covers, for hoses of liquid cooling solutions. The two at the top are 0.7” (17 mm) in diameter, while the other two are 1” (25 mm) in diameter.

click to enlarge
Figure 9: Rear panel

Let’s now take a look inside the Enermax Hoplite ST case.