| Deepcool Fiend Shark CPU Cooler Review |
|
|
|
| The Deepcool Fiend Shark |
Figure 4 illustrates the front of the cooler. The heatsink is 2.1 inches (55 mm) high from the CPU. The six 6 mm heatpipes connect the base to the heatsink. 
click to enlarge
Figure 4: Front view
Figure 5 reveals the side of the cooler. Here you can see how the heatpipes connect to what seems to be the center of a one-piece heatsink. 
click to enlarge
Figure 5: Side view
In Figure 6, you can see the top of the cooler. The 140 mm fan doesn’t completely cover the heatsink. 
click to enlarge
Figure 6: Top view
Figure 7 shows how the heatpipes are distributed on the base. Here you can notice that the Fiend Shark has not one, but two independent heatsinks. 
click to enlarge
Figure 7: Heatpipes
|
| « Previous | Page 2 of 8 | Next » |
| Print Version | Send to Friend |
Bookmark Article
| Comments (0)
|
|
|
|
|
 Latest News
May 24, 2013 - 6:39 AM PST
May 23, 2013 - 9:26 AM PST
May 22, 2013 - 9:39 AM PST
May 22, 2013 - 9:24 AM PST
May 22, 2013 - 9:23 AM PST
May 22, 2013 - 9:22 AM PST
May 21, 2013 - 10:11 AM PST
May 20, 2013 - 7:42 AM PST
May 20, 2013 - 7:40 AM PST
May 17, 2013 - 9:10 AM PST
Latest Content
Our Most Popular Articles
1,881,546 views
1,813,375 views
1,439,404 views
1,409,152 views
1,296,370 views
1,150,522 views
1,093,235 views
805,621 views
743,595 views
730,374 views
Latest Threads in Our Forums
by c.hegge
by Pholostan
by vla
by Gabriel Torres
by Hardware Secrets Team
by c.hegge
by Hardware Secrets Team
by Hardware Secrets Team
by Hardware Secrets Team
by Hardware Secrets Team
|
