In Figure 3 you have a front view of the cooler. It has a small base and three U-shape heatpipes connecting the base to the heatsink.

click to enlarge
Figure 3: Front view.

In Figure 3 we can see the heatpipes and the fan support. The holding mechanism is the main difference between the new and the old model: the new revision uses a plastic frame while the old model used wire clips.

click to enlarge
Figure 4: Side view.

In Figure 5, you can see the back of the cooler.

click to enlarge
Figure 5: Rear view.

In Figure 6, you can see the top of the cooler. Note the tips of the heatpipes and the shape of the fins.

click to enlarge
Figure 6: Top view.