Hardware Secrets
Home | Camera | Case | CE | Cooling | CPU | Input | Memory | Mobile | Motherboard | Networking | Power | Storage | Video | Other
First Look
Gabriel’s Blog
Main Menu
About Us
Awarded Products
Manufacturer Finder
RSS Feed
Test Your Skills
Subscribe today!
Build Your Own PC Do-It-Yourself For Dummies
Build Your Own PC Do-It-Yourself For Dummies, by Mark L. Chambers (For Dummies), starting at $7.98
Home » Case
Cooler Master ATCS 840 Case Review
Author: Gabriel Torres 74,652 views
Type: Reviews Last Updated: December 10, 2008
Page: 3 of 8
Rear Panel
Hardware Secrets Golden Award

The rear panel from ATCS 840 can be seen in Figure 8. By default the power supply should be installed on the lower compartment. This case, however, has a second power supply compartment on the top, which can be used if for some reason you want to install your power supply on the top or if you want to install two power supplies on this case.

In order to install a power supply on the top part of the case, however, you need to permanently remove one of the two top fans (or the two of them if your power supply is more than 8” – 20 cm – deep). Thus it is recommended that you install a power supply on the top only if you want a system with two power supplies. In this case you need to add a metallic holder for the top unit, which comes with the product.

ATCS 840, however, doesn’t come with the necessary adapter to make two power supplies to turn on at the same time. If you install two power supplies you will need to either buy this adapter or manually connect the green wire (pin 14) from the two power supplies together, to allow them to turn on at the same time when you press the standby (a.k.a. on/off) switch from the case.

Cooler Master ATCS 840 Case Review
click to enlarge
Figure 8: Rear panel.

This case comes with two holes protected with a rubber cover for installing external water cooling solutions, so you won’t need to drill or break anything on your case to install such solutions. These holes are available where the top power supply is installed, so if you install a second power supply you lose this feature.

There is a 120 mm fan on the rear of this case (you can monitor its speed if you install it directly on your motherboard).

This case has seven slots for expansion boards and all they use meshed covers, enhancing the airflow, especially if you use the feature we are going to talk next.

ATCS 840 comes with an external exhaustion chamber for the expansion boards. This is especially attractive if you have high-end video cards that generate a lot of hot air on the back of the computer, which probably is the case if you are willing to by this product. In order to use this device, however, you need to buy a 120 mm fan, because ATCS 840 doesn’t come with it.

Cooler Master ATCS 840 Case Review
click to enlarge
Figure 9: External exhaustion chamber.

Cooler Master ATCS 840 Case Review
click to enlarge
Figure 10: Chamber added to the rear panel.

As you can see this box has two holes protected by rubber covers to allow you to route the cables from your computer, like the monitor cable.

Now let’s take a look inside ATCS 840.

Print Version | Send to Friend | Bookmark Article « Previous |  Page 3 of 8  | Next »

Related Content
  • Zalman GS1000 Case Review
  • Lian Li PC-888 Case
  • CM Storm Trooper Case Review
  • Cooler Master TPC 812 CPU Cooler Review
  • Cooler Master Elite 431 Plus Case Review

  • RSSLatest Content
    ASRock FM2A88X-ITX+ Motherboard
    April 27, 2015 - 2:40 AM
    GeForce GTX TITAN X Video Card Review
    April 22, 2015 - 4:00 AM
    A10-7800 CPU Review
    April 6, 2015 - 2:50 AM
    Samsung Galaxy A5 Smartphone Review
    March 31, 2015 - 2:47 AM
    A10-6800K vs. Core i3-4150 CPU Review
    March 25, 2015 - 3:15 AM
    Core i7-5960X CPU Review
    February 24, 2015 - 3:00 AM

    © 2004-15 Clube do Hardware, all rights reserved.
    Advertising | Legal Information | Privacy Policy
    All times are Pacific Standard Time (PST, GMT -08:00)