Hardware Secrets
Home | Camera | Case | CE | Cooling | CPU | Input | Memory | Mobile | Motherboard | Networking | Power | Storage | Video | Other
Content
Articles
Editorial
First Look
Gabriel’s Blog
News
Reviews
Tutorials
Main Menu
About Us
Awarded Products
Datasheets
Dictionary
Download
Drivers
Facebook
Links
Manufacturer Finder
Newsletter
RSS Feed
Test Your Skills
Twitter
Newsletter
Subscribe today!
Search
Recommended
iPad and iPhone Tips and Tricks: For iOS 5 on iPad 2 and iPhone 4/4s
iPad and iPhone Tips and Tricks: For iOS 5 on iPad 2 and iPhone 4/4s, by Jason Rich (Que Publishing), starting at $0.03


Home » CE
Blu-Ray vs. HD-DVD
Author: Cssio Lima 146,140 views
Type: Articles Last Updated: January 18, 2007
Page: 2 of 3
Blu-Ray vs. HD-DVD

Blu-Ray technology was developed in February 2002 to be DVD’s successor by a consortium made by companies that include Apple, Dell, Hitachi, HP, JVC, LG, Mitsubishi, Panasonic, Pioneer, Phillips, Samsung, Sharp, Sony, TDK and Thomson. HD-DVD, on the other hand, was created by Toshiba and recently got support from Microsoft, HP and Intel.

Both Blu-Ray and HD-DVD discs have the same physical size of DVD discs (and CDs), with a diameter of 12 cm (120 mm, around 4 “).

The key to both Blu-Ray and HD-DVD technologies is the use of a blue-purple laser to read and write data from the disc. This laser has a smaller wavelength compared to the red laser used by DVD players, allowing a higher recording density.

During the recording of a Blu-Ray or HD-DVD disc a high-power blue-purple laser is used to burn pits on the disc surface. The areas than weren’t burned are known as lands.

During the reading of a Blue-Ray or HD-DVD disc a blue-purple laser with lower intensity is thrown on the disc surface. When the light reaches a pit it is reflected back with a lower intensity compared when it hit a land. As the pit height corresponds to of the laser wavelength, the reflected light reaches the photosensor found on the Blu-Ray or HD-DVD player half wavelength dephased ( on its way in + on its way back = ). This is how the Blu-Ray or HD-DVD player can recognize if an area is a pit or a land: the amount of light reflected by a land is higher than the amount reflected by a pit.

You could think that each spot where the light is reflected with a higher intensity (land) equals to a ”1“ bit while each spot where the light is reflected with a lower intensity (pit) equals to a ”0“ bit. However Blu-Ray and HD-DVD players use the transition between pits and lands or lands and pits to represent a ”1“ bit and the absence of such transitions to represent a ”0“ bit.

Each bit read this way is called an optical bit. They still do not represent directly a data ”0“ or ”1“. A process known as modulation is still required to convert optical bits into data bits. HD-DVD uses a modulation technique called ETM (Eight to Twelve Modulation), which converts each group of eight data bits (one byte) into 12 optical bits. Blue-Ray uses a modulation technique called 17PP that converts a variable number of optical bits in data bits based on rules defined by the modulation algorithm.

Just like what happens on CDs and DVDs, on Blu-Ray and HD-DVD discs pits and lands are organized into a single spiral track that starts at the center of the disc and ends at the border of the disc. The smaller the distance between the spiral tracks, more data can be stored on the disc. On Blu-Ray discs this distance is smaller than on HD-DVD discs (0.32 m vs. 0.40 m, respectively).

Also, on Blu-Ray discs each pit measures 0.13 m, while on HD-DVD discs they measure 0.20 m.

But why do HD-DVD discs use bigger pits compared to Blu-Ray if both use a laser with the same wavelength? The answer is the distance between the recording layer and the lacquer layer. On Blu-Ray discs the recording layer is only 0.1 mm distant from the lacquer layer, which allows a higher recording density (HD-DVD discs use the same distance as DVDs, 0.6 mm). On the other hand Blu-Ray discs must be handled more carefully, as any scratch on its surface can easily reach the recording layer, compromising the recorded data. That is why some Blu-Ray discs come inside a caddy in order to avoid physical damage.

As we can see, technologically speaking Blu-Ray and HD-DVD are very similar, the main difference between the two being the storage capacity.

A single-layer Blu-Ray disc can hold up to 25 GB, while a single-layer HD-DVD disc can hold up to "only" 15 GB. A dual-layer Blu-Ray disc can store up to 54 GB, while a dual-layer HD-DVD can store only up to 30 GB.

In the table below we summarized the main technical specs of Blu-Ray and HD-DVD discs.

Feature

Blu-Ray

HD-DVD

Capacity

  • 25 GB (single layer)
  • 54 GB (dual layer)
  • 15 GB (single layer)
  • 30 GB (dual layer)
  • Laser

    Blue-violet (0.40 m)

    Blue-violet (0.40 m)

    Pit width

    0.13 m

    0.20 m

    Distance between tracks

    0.32 m

    0.40 m

    Distance between the recording layer and the lacquer layer

    0.1 mm

    0.6 mm

    Supported codecs

  • MPEG-2
  • MPEG-4
  • AVC
  • VC-1
  • MPEG-2
  • MPEG-4
  • AVC
  • VC-1

  • In the table below you can see the main entertainment-related companies (i.e., movies and games) that support each technology.

    Blu-Ray

    HD-DVD

    • 20th Century Fox
    • Buena Vista Home Entertainment
    • Electronic Arts
    • MGM Studios
    • Paramount Pictures
    • Sony Pictures Entertainment
    • The Walt Disney Company
    • Vivendi Universal Games
    • Warner Bros.
    • Buena Vista Home Entertainment
    • New Line Cinema
    • Paramount Pictures
    • The Walt Disney Company
    • Universal Studios
    • Warner Bros.
    • The Weinstein Company/Genius

    Print Version | Send to Friend | Bookmark Article « Previous |  Page 2 of 3  | Next »

    Related Content
  • Measuring CD-ROM and DVD-ROM Performance
  • Anatomy of an Optical Drive
  • Samsung BD-P1400 Blu-Ray Player Review
  • Panasonic DVD-S53 DVD Player Review
  • Samsung SE-S084 External DVD Writer Review

  • RSSLatest Content
    ASUS ZenFone 5 Smartphone Review
    October 15, 2014 - 7:00 PM
    ASUS AM1M-A Motherboard
    October 15, 2014 - 4:30 AM
    ASRock X99 Extreme4 Motherboard
    October 14, 2014 - 4:10 AM
    Cooler Master Elite 130 Case Review
    October 9, 2014 - 2:46 AM
    ASUS RAMPAGE V EXTREME Motherboard
    October 7, 2014 - 2:50 AM
    ASRock Fatal1ty X99M Killer Motherboard
    October 6, 2014 - 5:40 AM
    ASUS X99-DELUXE Motherboard
    September 30, 2014 - 1:07 AM
    MSI GT70 2PE Dominator Pro Laptop Review
    September 25, 2014 - 1:15 AM







    2004-14, Hardware Secrets, LLC. All rights reserved.
    Advertising | Legal Information | Privacy Policy
    All times are Pacific Standard Time (PST, GMT -08:00)