As already explained, the front panel of the Bitfenix Prodigy is solid on the white version and meshed on the black version, and it has a rubberized finish. It comes with one 5.25” bay.

click to enlarge
Figure 5: Front panel

The case comes with a 120 mm fan behind the front panel, using a standard three-pin fan power connector. You can install a second 120 mm fan or a 140 mm, 180 mm, 200 mm or 230 mm fan and even a 240 mm radiator after removing the 120 mm fan.

click to enlarge
Figure 6: Front panel

The top panel of the Prodigy comes with an air filter and supports the installation of two 120 mm fans or a 240 mm radiator of liquid cooling solutions.

click to enlarge
Figure 7: Top panel

click to enlarge
Figure 8: Top panel