| Ultra X4 500 W Power Supply Review |
|
|
Real-time pricing for Zalman ZM500-HP |
| ZALMAN ZM500-HP Power supply internal ATX12V 2.2/ EPS12V AC 115/230 V 500 Watt active PFC |
|
|
|
|
|
| Introduction |
 Ultra has recently launched a new power supply series, X4, with seven models featuring a complete modular cabling system and single-rail design. We’ve already reviewed the 850 W model from this series and now we are going to dissect their 500 W version. Power supplies from X4 series are manufactured by Andyson.  click to enlarge Figure 1: Ultra X4 500 W power supply.
 click to enlarge Figure 2: Ultra X4 500 W power supply.
Ultra X4 500 W is 6 19/64” (160 mm) deep, using a 135 mm fan on its bottom and featuring active PFC, of course. As mentioned, Ultra X4 has a fully modular cabling system, meaning that even the main motherboard cable is removable. The cables included are: - Main motherboard cable with a 24-pin connector (no 20-pin support) (23” or 59 cm).
- One EPS12V cable (23” or 59 cm).
- One ATX12V cable (23 5/8” or 60 cm).
- One cable with one six-pin video card auxiliary power connector (23 5/8” or 60 cm).
- One cable with one six/eight-pin video card auxiliary power connector (23 5/8” or 60 cm).
- Three SATA power cables with three SATA power connectors each (17 3/4” or 45 cm between the power supply and the first connector, 6 1/8” or 15.5 cm between connectors).
- One peripheral power cable with three standard peripheral power plugs (17 3/8” or 44 cm between the power supply and the first connector, 6” or 15 cm between connectors).
- One peripheral power cable with two standard peripheral power plugs (17 3/8” or 44 cm between the power supply and the first connector, 6” or 15 cm between connectors).
- Two peripheral power cables with two standard peripheral power plugs and one floppy disk drive power connector (17 3/8” or 44 cm between the power supply and the first connector, 6” or 15 cm between connectors).
- One adapter to convert any peripheral power plug into two fan power connectors.
All wires are 18 AWG, which is the correct gauge to be used, except the wires on the main motherboard cable, which are thicker (16 AWG). The number of cables and connectors is perfect for a 500 W product.  click to enlarge Figure 3: Cables.
Now let’s take an in-depth look inside this power supply.
|
| Page 1 of 10 | Next » |
| Print Version | Send to Friend |
Bookmark Article
| Comments (2)
|
|
|
|
Recommended Deal |
 | Ultra ULT-LSP750
Ultra LSP750 750-Watt Power Supply ATX SATA-Ready SLI-Ready 135mm Fan Lifetime Warranty w/ Registration
|
|
 Latest News
February 10, 2012 - 8:20 AM PST
February 9, 2012 - 8:06 AM PST
February 8, 2012 - 7:50 AM PST
February 7, 2012 - 8:31 AM PST
February 6, 2012 - 7:40 AM PST
February 3, 2012 - 8:19 AM PST
February 2, 2012 - 8:42 AM PST
February 2, 2012 - 8:41 AM PST
February 1, 2012 - 4:50 PM PST
February 1, 2012 - 7:55 AM PST
 Latest Content
Our Most Popular Articles
1,613,311 views
1,414,402 views
1,158,372 views
1,117,412 views
1,044,118 views
944,128 views
742,357 views
669,437 views
652,746 views
623,105 views
Latest Threads in Our Forums
by c.hegge
by RayBay
by RayBay
by WreakingHavoc
by dlb
by loonicy
by Hardware Secrets Team
by Gabriel Torres
by Hardware Secrets Team
by Gabriel Torres
|