In Figure 5, you can see where the fan stays inside the cooler. Since it is a 92 mm model the cooler could be lower than models using 120 mm fans. The fan touches only one of the heatsinks. On top of the cooler base there are also some fins to help dissipating heat.

click to enlarge
Figure 5: Side view.

In Figure 6, you can see how ISGC-200 looks from the top.

click to enlarge
Figure 6: Top view.

click to enlarge
Figure 7: Base.

In Figure 8, you can see how the heatsink looks like without the fan.

click to enlarge
Figure 8: Heatsink without the fan.

The fan is identical to the one used on ISGC-100, with cuttings on the tips of the blades intended to reduce noise level. It uses a four-pin miniature connector, therefore with PWM control, i.e., the motherboard controls the fan speed automatically according to the CPU load level and temperature.

click to enlarge
Figure 9: Fan.