This case has one external bay for slim optical drives, one internal 3 ½” bay for hard disk drives and one internal 2.5” bay for hard disk drive or SSD units.

click to enlarge
Figure 9: The optical drive bay.

The 3 ½” and the 2.5”bay are located below the optical drive bay. The 3 ½” bay goes on the bottom and the 2.5” bay goes between the optical drive bay and the 3 ½” bay.

click to enlarge
Figure 10: The 3 ½” and 2.5” bays.

SG06 comes with an adapter to allow the connection of parallel ATA slim optical drives, converting the 50-pin connector available on such units into a 40-pin parallel ATA connector and into floppy disk drive power connector.

click to enlarge
Figure 11: Adaptor for parallel ATA slim optical drives.