This case has one external bay for slim optical drives, one internal 3 ½” bay for hard disk drives and one internal 2.5” bay for hard disk drive or SSD units.

click to enlarge
Figure 9: The optical drive bay.

The 3 ½” and the 2.5”bay are located below the optical drive bay. The 3 ½” bay can be seen in Figure 7. In Figure 10 we removed it from the case and installed a hard disk drive to show you. This case does not provide any kind of screwless or anti-vibration mechanism.

click to enlarge
Figure 10: The 3 ½” bay.

The 2.5” bay is located between the optical drive bay and the 3 ½” bay, as shown in Figure 11 (the 3 ½” was removed).

click to enlarge
Figure 11: The 2.5” bay.

click to enlarge
Figure 12: The 2.5” bay and the optical drive bay outside the case (upside down).