We decided to disassemble this power supply to see how it looks like inside, what is the design used and what components are used. Please read our Anatomy of Switching Power Supplies tutorial to understand how a power supply works inside and to compare this power supply to others.
In this page we will have an overall look, while on the next pages we will discuss in details the quality and rating of the components used.
Antec was expecting us to disassemble this unit, as it has its logo inside the power supply.
click to enlarge
Figure 6: Antec logo on one of the covers.
This power supply uses two printed circuit boards, a small one with the transient filtering stage, the rectifying bridge and the PFC coil, and a big one with all other components. The solder side of each board was facing outside the power supply, so the components from the two boards were facing the middle of the power supply, making a tunnel so air could pass and cool the components down.
click to enlarge
Figure 7: Overall look.
click to enlarge
Figure 8: Overall look.
click to enlarge
Figure 9: Overall look.
