In Figure 9 we can have an overall look inside Rosewill Conqueror. Even though we can remove the right panel the motherboard tray is permanently attached to the chassis.

click to enlarge
Figure 9: Inside Conqueror.

The material used inside the case is the same one used by low-end products and even though the edges are rounded to avoid you from cutting yourself we were afraid of getting cut (this didn’t happen, though).

As you can see, no screwless mechanism is used to fast disk drives or daughter boards; they must be fastened to the case using regular screws.

click to enlarge
Figure 10: Rear panel, inside view.

Now let’s take an in-depth look at the disk drive options from the reviewed case.