This case is opened by removing its top panel, which is fastened to the chassis using thumbscrews, which is great. All parts from this case are made in aluminum.

click to enlarge
Figure 10: Inside Moncaso972.

In Figure 11, you can see the rear panel from this case viewed from inside. You can see that the daughter boards use thumbscrews, which is very nice and, in our opinion, better than the use of screwless mechanisms, as most of these mechanisms don’t work well. You can also see the two rear 80 mm fans.

click to enlarge
Figure 11: Thumbscrews for fastening daughter boards and rear 80 mm fans.