After you have the dock and the remote situated, you will have to sync the doc to your radio. That means finding an unused FM on your car radio and setting the TransDock to the same frequency.

The TransDock has 6 preset stations: 88.1, 88.5, 94.9, 100.9, 103.9 and 107.9 MHz. You can cycle throught these presets by pressing the Mode Button on the left side of the TransDock, as shown in Figure 10. You can also set your own frequencies by using the up and down buttons on the right side of the TransDock, as shown in Figure 11. The TransDock shows you the number of the station on its LCD screen, as shown in Figure 12.

click to enlarge
Figure 10: Mode Buttons.

click to enlarge
Figure 11: Up and Down Buttons.

click to enlarge
Figure 12: LCD Screen.

The 6 presets can also be controlled by the remote control. If you set the same stations as presets on your radio, if you lose a signal on one station, you can quickly move to another station by pressing a button on the remote and one on the radio.