You have to be very careful when building this case in order to not scratch or crack it. We recommend you to build it on top of a carpet. Do not apply too much pressure on the screws to avoid cracking the acrylic. The case comes with a pair of gloves to avoid your from scratching or leaving lots of fingerprints while building the unit. Even with all our care we made a little scratch on the bottom panel from our sample.

The manual, even though is written in “Engrish”, is very detailed and easy to follow. One thing that helped a lot was the fact that all screws came in individual little bags with stickers telling their part numbers (used on the manual) and their use. The main screws are thumbscrews, which is great.

We took pictures of the case after the completion of each building step present on the manual; so on the pictures below you can follow the birth of our acrylic case.

click to enlarge
Figure 9: Step 1.

click to enlarge
Figure 10: Step 2.

click to enlarge
Figure 11: Step 3.

click to enlarge
Figure 12: Step 4.