During our benchmarking sessions we used the configuration listed below. Between our benchmarking sessions the only variable device was the video card being tested.

Hardware Configuration

• CPU: Core 2 Extreme QX9770 (3.2 GHz, 1,600 MHz FSB, 12 MB L2 memory cache).
• Motherboard: EVGA nForce 790i Ultra SLI (P05 BIOS)
• Memories: Crucial Ballistix PC3-16000 2 GB kit (BL2KIT12864BE2009), running at 2,000 MHz with 9-9-9-28 timings.
• Hard disk drive: Western Digital VelociRaptor WD3000GLFS (300 GB, SATA-300, 10,000 rpm, 16 MB cache).
• Video monitor: Samsung SyncMaster 305T (LCD, 30”, 2560x1600).
• Power supply: OCZ EliteXStream 1,000 W.
• CPU Cooler: Thermaltake TMG i1
• Optical Drive: LG GSA-H54N
• Desktop video resolution: 2560x1600 60 Hz

Software Configuration

• Windows Vista Ultimate 32-bit
• Service Pack 1

Driver Versions

• nForce driver version: 15.17
• AMD/ATI video driver version: Catalyst 8.5
• AMD/ATI video driver version: Catalyst 8.6 + hotfix (8.501.1.0, 6/21/2008) (Radeon HD 4850)
• nVidia video driver version: 175.16
• nVidia video driver version: 177.34 (GeForce GTX 280)

• 3DMark06 Professional 1.1.0 + October 2007 Hotfix
• 3DMark Vantage Professional 1.0.1
• Call of Duty 4 – Patch 1.6
• Crysis – Patch 1.2.1 + HardwareOC Crysis Benchmark Tool 1.3.0.0
• Half-Life 2: Episode Two – Patch June 9^th 2008 + HardwareOC Half-Life 2 Episode Two Benchmark Tool 1.2.0.0
• Quake 4 – Patch 1.4.2 
• Unreal Tournament 3 – Patch 1.2 + HardwareOC UT3 Benchmark Tool 1.2.0.0

Resolutions and Image Quality Settings

Since we were comparing very high-end video cards, we ran all our tests under three 16:10 widescreen high resolutions: 1680x1050, 1920x1200 and 2560x1600. We always tried to run the programs and games in two scenarios for each resolution, one with low image quality settings and then maxing out the image quality settings. The exact configuration we used will be described together with the results of each individual test.

Error Margin

We adopted a 3% error margin. Thus differences below 3% cannot be considered relevant. In other words, products with a performance difference below 3% should be considered as having similar performance.