To install optical or floppy disk drives you will need first to remove the meshed cover that is in front of the bay that you want to use. As we already explained, to remove these covers you need to first open the two long side latches present on the front panel.

click to enlarge
Figure 22: 5 ¼” bay cover.

If you are installing a floppy disk drive, you will need to first install the two metallic adaptors that come with the case on the drive.

click to enlarge
Figure 23: Adaptors for installing a floppy disk drive or a fifth hard disk drive.

The screwless mechanisms for installing 5 ¼” devices are really easy to use. They have a button that pressed once locks the drive into place. To release the drive, just press the button one more time.

click to enlarge
Figure 24: Sliding an optical drive in a 5 ¼” bay.

click to enlarge
Figure 25: Align the optical drive with the other covers or devices.

click to enlarge
Figure 26: Fastening the optical drive to the case.