| Albatron K8SLI Motherboard Review |
|
|
Real-time pricing for Asrock M3A770DE |
| ASRock AM3 processors AMD 770-140W 4DDR3/ATI CrossFireX motherboard M3A770DE maxGDER04 Electronics Usually ships in 24 hours |
|
|
|
| 3D Performance: Quake III |
Even though this is an old game its importance comes from the fact its engine is used by several other games, like Jedi Knight II and Medal of Honor, and also because this game is very sensitive to any changes on the hardware configuration. So we used this game to check how the reviewed motherboard acted running old but popular games.
We used the demo four available on version 1.32 of Quake III to make our benchmarking with this game. We ran this demo three times at 1024x768x32 resolution and all image quality settings on their default configuration and we picked the middle value for our comparisons, i.e., we discarded the highest and the lowest values.
Check the results below.

|
Motherboard |
FPS |
% |
| MSI K8N Diamond Plus (nForce4 SLI X16) Normal |
357.5 |
+8.27 |
| DFI LANParty UT nF4 SLI-D (nForce4 SLI) Normal |
345.6 |
+4.66 |
| Albatron K8SLI (nForce4 SLI) Normal |
330.2 |
|
| ULi AP970A (ULi M1697) |
329.2 |
-0.30 |
| Foxconn WinFast NF4UK8AA-8EKRS (nForce4 Ultra) |
328.5 |
-0.52 |
| ECS KN1 SLI Extreme (nForce4 SLI) Normal |
327.2 |
-0.92 |
| ASUS A8N-SLI Deluxe (nForce4 SLI) Normal |
326.2 |
-1.23 |
| Sapphire PI-A9RX480 (ATI Xpress 200P) |
325.2 |
-1.54 |
| ULi AP9567A (ULi M1695) |
324.4 |
-1.79 |
| ULi AP9567A (ULi M1695) - AGP |
321.2 |
-2.80 |
| ECS KN1 Extreme (nForce4 Ultra) |
315.5 |
-4.66 |
| Albatron K8SLI (nForce4 SLI) |
281.3 |
-17.38 |
On Quake III under normal mode K8SLI was beaten by DFI LANParty UT nF4 SLI-D (nForce4 SLI) and by MSI K8N Diamond Plus (nForce4 SLI X16), this one using a newer video driver and because of this achieved a better performance than other motherboards. K8SLI achieved a performance similar to the other motherboards we reviewed, being a little bit faster than KN1 Extreme (nForce4 Ultra).
On MSI K8N Diamond Plus we had to use a newer driver because nForce4 SLI X16 chipset only works with newer video drivers. The ideal scenario would be benchmarking all the motherboards with the same newer video driver, but several of the motherboards included on our tests weren’t available anymore.
Under SLI mode, excluding MSI K8N Diamond Plus that was using a newer video driver, Albatron K8SLI was beaten only by DFI LANParty UT nF4 SLI-D (nForce4 SLI).
But keep in mind that on Quake III SLI decreases the system performance instead of increasing it (see previous table).
|
Motherboard |
FPS |
% |
| MSI K8N Diamond Plus (nForce4 SLI X16) |
335.2 |
+19.16 |
| DFI LANParty UT nF4 SLI-D (nForce4 SLI) |
294.3 |
+4.62 |
| Albatron K8SLI (nForce4 SLI) Normal |
281.3 |
|
| ECS KN1 SLI Extreme (nForce4 SLI) |
279.8 |
-0.54 |
| ASUS A8N-SLI Deluxe (nForce4 SLI) |
276.8 |
-1.63 |
|
| « Previous | Page 11 of 13 | Next » |
| Print Version | Send to Friend |
Bookmark Article
| Comments (0)
|
|
|
|
Recommended Deal |
 | EVGA 132-GT-E768-TR
EVGA Core i7/Intel X58/3-Way SLI & CrossFireX/SATA3&USB3.0/A&2GbE/ATX Motherboard 132-GT-E768-TR Electronics Usually ships in 24 hours
|
|
 Latest News
February 10, 2012 - 8:20 AM PST
February 9, 2012 - 8:06 AM PST
February 8, 2012 - 7:50 AM PST
February 7, 2012 - 8:31 AM PST
February 6, 2012 - 7:40 AM PST
February 3, 2012 - 8:19 AM PST
February 2, 2012 - 8:42 AM PST
February 2, 2012 - 8:41 AM PST
February 1, 2012 - 4:50 PM PST
February 1, 2012 - 7:55 AM PST
 Latest Content
Our Most Popular Articles
1,613,252 views
1,414,334 views
1,158,291 views
1,117,370 views
1,044,054 views
944,049 views
742,288 views
669,418 views
652,703 views
623,076 views
Latest Threads in Our Forums
by c.hegge
by RayBay
by RayBay
by WreakingHavoc
by dlb
by loonicy
by Hardware Secrets Team
by Gabriel Torres
by Hardware Secrets Team
by Gabriel Torres
|