After applying the thermal grease, you should obviously install the cooler. The process is relatively simple and doesn’t require the use of tools. Just fix the cooler and close its rotative lock, as we show in the pictures below.

click to enlarge
Figure 23: Position and fix one side.

click to enlarge
Figure 24: Fix the other side and close the lock.

click to enlarge
Figure 25: Pull the lock to the end.

click to enlarge
Figure 26: Cooler locked.

After installing the cooler over the processor, install the cooler power plug to the motherboard.

click to enlarge

Figure 27: Connect the fan wire.

That’s it, the thermal grease is correctly applied and your cooler is installed.