| How to Unclog Epson Print Heads |
|
|
$ Check REAL-TIME pricing for Amazon.com Brother MFC-9840CDW Color Laser Multifunction Center with Wireless Interface and Duplex Electronics $ |
|
|
|
|
|
| Disassembling The Printer |
Disassemble the printer. Almost all of them are similar to disassemble. First you have to remove the printer housing, by opening its cover, moving the paper type adjustment lever (a.k.a. PG, Platen Gap) towards (+) side, than removing the two or four screws available on the printer top.
 click to enlarge Figure 3: Removing the printer housing.
After removing the cover, you have to remove two bushings, one at each side of the carriage guide shaft. TAKE NOTES OF THE POSITION OF THE BUSHINGS BEFORE YOU REMOVE THEM. Those bushings regulate the distance between the print head and the paper (“parallelism”). If you put them back wrong, your printer will print wrong.
 click to enlarge Figure 4: How to remove the printer carriage assembly.
|
| Pages (4): « 1 [2] 3 4 » |
| Print Version | Send to Friend |
|
Bookmark Article
| Comments (1)
|
|
Recommended Deal |
 | Amazon.com Brother MFC-9840CDW Color Laser Multifunction Center with Wireless Interface and Duplex Electronics
|
|
Latest News |
November 6, 2009 - 3:07 PM PST |
November 5, 2009 - 3:49 PM PST |
November 5, 2009 - 3:47 PM PST |
November 5, 2009 - 3:42 PM PST |
November 5, 2009 - 3:38 PM PST |
November 5, 2009 - 3:36 PM PST |
November 3, 2009 - 8:14 PM PST |
November 3, 2009 - 7:57 PM PST |
November 3, 2009 - 7:51 PM PST |
November 2, 2009 - 6:05 PM PST |
| .:: More News ::. |
|
Latest Content |
|
|
| Our Most Popular Articles |
1,070,987 views
|
695,382 views
|
671,523 views
|
585,925 views
|
556,050 views
|
554,187 views
|
485,833 views
|
474,893 views
|
389,481 views
|
336,589 views
|
|
| Latest Threads in Our Forums |
by shadixmax |
by ftomsuk |
by cchjde |
by delta32 |
by Desert Fox |
by sam_wade07 |
by fjs559 |
by Hardware Secrets Team |
by Merman |
by Olle P |
| .:: Visit Our Forums ::. |
|
|