The Antec Kühler H2O 920

Figures 3 and 4 reveal the radiator, which has the purpose of transferring the heat from the coolant liquid to the air passing through it. The hoses that connect the radiator to the block are very flexible, allowing easy installation.

Antec Kühler H2O 920Figure 3: Radiator

Antec Kühler H2O 920Figure 4: Radiator

Figures 5 and 6 present the block, which performs the task of transferring the heat from the CPU to the circulating liquid. The pump is integrated in the block. The copper base comes with pre-applied thermal compound.

Antec Kühler H2O 920Figure 5: Block

Antec Kühler H2O 920Figure 6: Base

Figure 7 shows the cables that come off the block. The left one must be connected to the motherboard in order to power up the product. The middle ones are for connecting the fans, and the right connector goes on a USB header of the motherboard.

Antec Kühler H2O 920Figure 7: Connectors

The 120 mm fans are shown in Figure 8. They have four pin connectors, which means they are compatible with PWM speed control.

Antec Kühler H2O 920Figure 8: Fans


Rafael Otto Coelho is a physicist with a master’s degree in Education, and is a college professor in Brazil.